Location analysis

Elevation Profile

The Elevation Profile tool shows how high the ground is, anywhere on Earth. Click one point on the map to read its height above sea level. Click a second point and MapGO draws a line between them and charts the height along it, so you can see every hill and valley the line crosses.

In the workspace

Try it on the map.

The Elevation Profile runs live in the MapGO workspace, on an interactive map.

Free to use, no signup.

Open in workspace

You can keep adding points, up to ten, to follow a route with bends. Under the chart you get the distance, the start and end heights, the lowest and highest point, and, for lines up to 50 km, the total climb and descent. Move the pointer over the chart and a dot on the map shows where that part of the profile is.

How it works

Heights come from the Copernicus Digital Elevation Model (GLO-90), a worldwide grid with one height about every 90 metres, measured from mean sea level. MapGO keeps the whole grid on its own server, so no outside service is asked.

For a line, MapGO reads about 200 heights spaced evenly from the first point to the last, along the shortest path over the globe between your points. That is a straight line, not a road or a trail: to follow a winding path, click along it.

Two things are worth knowing when you read the figures. The model maps the top surface, so in a forest or a dense city it includes trees and roofs. And because one height covers about 90 metres, a narrow summit or ridge can read lower than its surveyed height, while ordinary ground is usually within a few metres.

How to use the Elevation Profile

  1. Step 1

    Drop the first point

    Click the map, search a place or address, or enter coordinates. The panel shows the height above sea level at that point.

  2. Step 2

    Add a second point

    Click again to draw a line. The panel charts the elevation along it and lists the distance, lowest and highest point, climb and descent.

  3. Step 3

    Follow a route

    Keep clicking to add up to ten points along a path. Remove the last point, or press Clear to start again.

  4. Step 4

    Share or download

    Copy the link to share the same profile, or download the heights along the line as a CSV file.

What people use it for

Hiking, cycling and running

See how much climbing a route involves before you set out, and where the steep parts are.

Land, property and site checks

Check how a plot sits against the land around it: which way it slopes, and how far it is above a river or the sea.

Radio links, drones and line of sight

Look at the terrain between two points to spot a ridge that stands in the way.

Teaching and curiosity

Cut a section through a mountain range, a valley or a whole country and see its shape.

Frequently asked questions

How do I find the elevation between two points?
Click the first point on the map, then the second. MapGO draws a straight line between them and charts the height above sea level along it, with the distance, the lowest and highest point, and the total climb and descent.
How accurate are the heights?
On ordinary ground the figure is usually within a few metres. In steep mountain terrain it can differ more, because one height covers about 90 metres: a narrow summit can read tens of metres low, or more on a very sharp peak.
Is this ground level or the top of buildings and trees?
The top surface. The Copernicus model is a surface model, so in forests and built-up areas the height includes trees and roofs. On open ground it is the ground.
Does the profile follow roads or trails?
No. It follows the straight line between the points you click. To follow a road or a trail, click along it: a line can have up to ten points.
Why is the total climb lower than my GPS watch says?
The climb adds up the rises between about 200 heights read along the line, so the small ups and downs between them are not counted. The further apart those heights are, the less the sum means, which is why the tool shows climb and descent only for lines up to 50 km.
What does a height of 0 at sea mean?
The data covers land. Out at sea there is no height, so the tool shows 0 and, for a single point, says it is open sea.
Where does the data come from?
The Copernicus Digital Elevation Model GLO-90, produced using Copernicus WorldDEM-90 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014-2018, provided under COPERNICUS by the European Union and ESA; all rights reserved.

Open it on the map.

The Elevation Profile is one of the tools in the MapGO workspace, alongside everything else on the map.