Location analysis

Elevation

This tool tells you how high a place is. Click anywhere on the map, search for a place, or type a pair of coordinates, and you get the height above sea level at that point in metres and feet.

In the workspace

Try it on the map.

The Elevation runs live in the MapGO workspace, on an interactive map.

Free to use, no signup.

Open in workspace

It works everywhere on Earth, not only in one country: a street in Denver, a pass in the Alps, the shore of the Dead Sea below sea level. A point out in open sea reads 0 and is marked as open sea.

How it works

Heights are read from the Copernicus Digital Elevation Model (GLO-90), a worldwide grid of heights with one value about every 90 metres, measured from mean sea level. The figure for your point is blended from the four grid values around it.

Two things are worth knowing when you read the number. The model maps the top surface, so in a forest or a dense city centre it includes trees and roofs. And because each grid value covers about 90 metres, a very narrow summit or ridge can read lower than its surveyed height, while ordinary ground is usually within a few metres.

How to use the Elevation

  1. Step 1

    Pick a point

    Click the map, search for a place or address, enter coordinates, or use your own location.

  2. Step 2

    Read the height

    The elevation appears in metres and feet, with a pin on the map at the point you chose.

  3. Step 3

    Add a second point for a profile

    Click again to draw a line from the first point and chart the height along it, with the distance, lowest and highest point, climb and descent. Press Clear to start again.

  4. Step 4

    Keep the result

    Copy or download the answer as JSON, with the coordinates and the data source included.

What people use it for

Property and site checks

See how high a plot, a house or a planned site sits before looking closer at slope, drainage or flood questions.

Hiking, cycling and travel

Check the height of a trailhead, a pass, a hut or a town before a trip.

Teaching and curiosity

Compare the height of cities, find places below sea level, or see how quickly the land rises from a coast.

Field work and data

Add a height to a GPS point when your device did not record one, or sanity-check one it did.

Frequently asked questions

How accurate is the elevation?
On ordinary ground the figure is usually within a few metres. In steep mountain terrain it can differ more, because one grid value covers about 90 metres: a narrow summit can read tens of metres low, or more on a very sharp peak.
Is this ground level or the top of buildings and trees?
The top surface. The Copernicus model is a surface model, so in forests and built-up areas the height includes trees and roofs. On open ground it is the ground.
What does elevation 0 at sea mean?
The dataset covers land. A point in open sea has no height data, so the tool shows 0 and marks it as open sea. Water close to a coast is also shown at about 0.
Does it work outside the United States?
Yes. Coverage is worldwide, including Antarctica.
Where does the data come from?
The Copernicus Digital Elevation Model GLO-90, produced using Copernicus WorldDEM-90 © DLR e.V. 2010-2014 and © Airbus Defence and Space GmbH 2014-2018, provided under COPERNICUS by the European Union and ESA; all rights reserved.

Open it on the map.

The Elevation is one of the tools in the MapGO workspace, alongside everything else on the map.